We are not just a bulk stock holder, All American Metals Inc offer extensive service, including a huge range of standard aluminium extrusion profiles.
Aluminium Angle, Aluminium Flat Bar, Aluminium Round Bar, Aluminium Square Bar, Aluminium Channel, Aluminium Rectangular Tube, Aluminium Square Tube, Aluminium Round Tube, Aluminium Sheet Cut to Size, Aluminium Full Size Sheet, Aluminium Plate Cut To Size, Aluminium T-Section, Aluminium Z-Section, Easyfix Tube & Connectors, Aluminium Five Bar Treadplate – Cut to Size, Aluminium Five Bar Treadplate – Full Size Sheet, Miscellaneous Sections, Aluminium Cope Mouldings, Aluminium Double Feathered Edge, Aluminium Gutter Sections, Hanging Z Section, Aluminium Fluted Edging & Nosings, Half Round Moulding, Wallboard Sections
Chemical Composition
Alloy | %Si | %Mg | %Mn | %Cu | %Fe | %Cr | %Zn | %Ti | %Others | %Al |
EN AW-1050 A | 0.25Max | 0.05Max | 0.05Max | 0.05Max | 0.40Max | – | 0.07Max | 0.05Max | – | 99.5 Min |
EN AW-1070 A | 0.20Max | 0.03Max | 0.03Max | 0.03Max | 0.25Max | – | 0.07Max | 0.03Max | – | 99.7 Min |
EN AW-1100 | Si+Fe 0.95 Max | – | 0.05 Max | 0.05 – 0.20 | – | – | 0.10 Max | 0.05 Max | – | 99.0 Min |
EN AW-2011 | 0.40 Max | – | – | 5.00 – 6.00 | 0.70 Max | – | 0.30 Max | – | Bi : 0.20 – 0.60Pb : 0.20 – 0.60 | Remainder |
EN AW-2014 | 0.50 – 1.20 | 0.20 – 0.80 | 0.40 – 1.20 | 3.90 – 5.00 | 0.70 Max | 0.10 Max | 0.25 Max | 0.15 Max | – | Remainder |
EN AW-2024 | 0.50 Max | 1.20 -1.80 | 0.30 – 0.90 | 3.80 – 4.90 | 0.50 Max | 0.10 Max | 0.25 Max | 0.15 Max | 0.15 Max | Remainder |
EN AW-3003 | 0.60 Max | – | 1.00 – 1.50 | 0.05 – 0.20 | 0.70 Max | – | 0.10 Max | – | 0.15 Max | Remainder |
EN AW-3103 | 0.50 Max | 0.30 Max | 0.90 – 1.50 | 0.10 Max | 0.70 Max | 0.10 Max | 0.20 Max | 0.10 Max | – | Remainder |
EN AW-6101A | 0.30 – 0.7 | 0.40 – 0.90 | 0.03 Max | 0.05 Max | 0.40 Max | – | – | – | 0.10 Max | Remainder |
EN AW-6005 | 0.60 – 0.90 | 0.40 – 0.60 | 0.10 Max | 0.10 Max | 0.35 Max | 0.10 Max | 0.10 Max | 0.10 Max | – | Remainder |
EN AW-6351 | 0.70 – 1.30 | 0.40 – 0.80 | 0.40 – 0.80 | 0.10 Max | 0.50 Max | – | 0.20 Max | 0.20 Max | 0.15 Max | Remainder |
EN AW-6060 | 0.30 – 0.60 | 0.35 – 0.60 | 0.10 Max | 0.10 Max | 0.10 – 0.30 | 0.05 Max | 0.15 Max | 0.10 Max | – | Remainder |
EN AW-6061 | 0.40 – 0.80 | 0.80 – 1.20 | 0.15 Max | 0.15 – 0.40 | 0.70 Max | 0.04 – 0.35 | 0.25 Max | 0.15 Max | – | Remainder |
EN AW-6063 | 0.20 – 0.60 | 0.45 – 0.90 | 0.10 Max | 0.10 Max | 0.35 Max | 0.10 Max | 0.10 Max | 0.10 Max | – | Remainder |
EN AW-6082 | 0.70 – 1.30 | 0.60 -1.20 | 0.40 – 1.00 | 0.10 Max | 0.50 Max | 0.25 Max | 0.20 Max | 0.10 Max | – |
ALUMINUMALLOY | Grade | NormalTemper | Temper | Tensile StrengthN/mm² | Yield StrengthN/mm² | Elongation% | Brinell HardnessHB | |
Plate | Bar | |||||||
1XXX | 1050 | O,H112,H | O | 78 | 34 | 40 | – | 20 |
1060 | O,H112,H | O | 70 | 30 | 43 | – | 19 | |
Al-Cu(2XXX) | 2019 | O,T3,T4,T6,T8 | T851 | 450 | 350 | 10 | – | – |
2024 | O,T4 | T4 | 470 | 325 | 20 | 17 | 120 | |
Al-Mn(3XXX) | 3003 | O,H112,H | O | 110 | 40 | 30 | 37 | 28 |
3004 | O,H112,H | O | 180 | 70 | 20 | 22 | 45 | |
Al-Si (4XXX) | 4032 | O,T6,T62 | T6 | 380 | 315 | – | 9 | 120 |
Al-Mg(5XXX) | 5052 | O,H112,H | H34 | 260 | 215 | 10 | 12 | 68 |
5083 | O,H112,H | O | 290 | 145 | – | 20 | – | |
Al-Mg-Si(6XXX) | 6061 | O,T4,T6,T8 | T6 | 310 | 275 | 12 | 15 | 95 |
6063 | O,T1,T5,T6,T8 | T5 | 185 | 145 | 12 | – | 60 | |
Al-Zn-Mg(7XXX) | 7003 | T5 | T5 | 315 | 255 | 15 | – | 85 |
7075 | O,T6 | T6 | 570 | 505 | 11 | 9 |
If products is stock , about 7-10days can delivery after received deposit.
If custom products , 100tons about 20-25days , exceed 100tons within 300tons about 40-50days , exceed 300tons, within 60days .
The uncoated aluminum plates are separated by paper to prevent static electricity from damaging the surface.
The innermost is wrapped in kraft paper, waterproof plastic paper is added on the outer, and the edge is protected by a carton corner.
The trays are fumigation trays or non-fumigation trays, one trays weight about 3-4 tons.
A: We are All American Metals Inc specializing in the production and processing of aluminum products. Our products are sold to Southeast Asia, Northern Europe, North America, South Asia, Africa, the Middle East and China.
Our products have a large stock of more than 1000 tons and various specifications. We are a manufacturer of production and processing, with competitive prices. High quality and good reputation products.
If the goods are in stock, it usually takes 3 – 5 weeks. If the goods are not in stock, it is 5 – 7 weeks, which is determined according to the quantity.
Compared with other production and processing companies, we have many professionals, technicians, more competitive prices and the best after-sales service.